Wood chipper with a 6.5 HP petrol engine and an 80 mm cutting capacity. This petrol chipper is suitable for branches, hedges, stumps, prunings, and fresh wood up to 80 mm thick. The chipped material can be used as compost and as soil protection against weeds and drying out, for pathways, etc. Advantages: Hourly capacity: up to 3 m...
Wood chipper with a 6.5 HP petrol engine and a 100 mm cutting capacity.
This petrol chipper is suitable for branches, hedges, stumps, prunings, and fresh wood up to 100 mm thick. The shredded material can be used as compost and as soil protection against weeds and drying out, for pathways, etc.
Advantages:
- Hourly capacity: up to 3 m³ per hour
- High-quality 6.5 hp (212 cc) Loncin OHV petrol engine with manual start (recoil starter)
- Cutting capacity: up to 100 mm in diameter
- Cutting system: 150 mm duplex blade drum: 2 reversible hardened blades (150 x 55 x 5 mm ref. HHK84M1) and one counter-blade (150 x 50 x 15 mm ref. HHK84M2)
- Emergency stop + safety bar on the hopper
Features:
- The shredder produces medium-coarse materials with a length of 10 to 30 mm and can also shred softwood
- Fuel consumption of 1.22 l/h and tank capacity of 3.6 liters
2 drive belts - The spacious hopper, equipped with a 250 mm extension, supports branches and ensures easy and convenient filling
- Fixed hopper with opening 443 x 383 mm and height: 910 mm (730 mm without the extension plate)
Ejection height: 950 mm - A trailer, wheelbarrow, collection bin, or mini-dumper can be placed under the ejector to collect and transport the chips
- Wide base, does not sink into the ground in wet conditions
- 4.1/3.50-4 tires for stable and safe transport of the shredder on all terrains
- Suitable for transport off public roads
- Loncin G200F engine with manual start
- Suitable fuels: E5 (98), E10 (95), E15 (maximum 15% ethanol) type petrol and also alkylate petrol (Aspen) for 4-stroke engines. (Unsuitable fuels: E85, ethanol
- bioethanol)
Note: Not suitable for foliage, leaves, grasses, ferns and reeds
Quick and easy assembly
Options:
- Torros Safety Kit: safety glasses, helmet, cap (ref. BOPS100)
- Torros Safety Kit: safety glasses, helmet, cap (ref. BOMS100)
- 15W40 engine oil, 5-liter bottle (ref. MOTOROIL 650 15W40). The crusher is delivered without oil
- 10L PE can with flexible spout (ref. JERRYC10)
- 20L PE can with flexible spout (ref. JERRYC20)
- 75-liter mobile petrol tank with hand pump (ref. TB75M)
- 250 kg folding ramp 2000 x 300 mm (ref. AOP2001)
- 400 kg folding ramp 2000 x 650 mm (ref. AOP2003)
- 680 kg folding loading ramp pair 2260 x 280 mm (ref. SOP2200)
- 544 kg hand winch (ref. HNHW120)
- 900 kg 12V winch (ref. EL1000)
Similar products:
- Shredder with 50 mm cutting capacity (ref. HHK50)
- Grinder with 120 mm cutting capacity (ref. HHK122)
- Chopper with 150 mm cutting capacity, high throughput (ref. HHK150)
- Hydraulic disc shredder with feed roller, 120 mm cutting capacity (ref. HDK125H)
- Disc shredder, for fine, small and light materials such as ornamental grasses, thin twigs, leaves, foliage, shavings, roots, rhizomes, etc. Cutting capacity 120 mm (ref. HDK120)
- Tracked shredder, cutting capacity 120 mm (ref. RHK122)
Optional ramps:
- Pair of short aluminum ramps 3000kg 950x300mm - ref. SOK0800
- Pair of folding aluminum ramps, open type, 680kg 2260 x 280 mm - ref. SOP2200
- Pair of aluminum ramps 1000kg 1500 x 260 mm - ref. SOR1500
- Pair of aluminum ramps 1000kg 2000 x 260 mm - ref. SOR2000
- Pair of 1000kg aluminum ramps, 2500 x 260 mm - ref. SOR2500
- Pair of 1000kg folding aluminum ramps, 2400 x 240 mm - ref. SOP2400
Note:
Cutting capacity depends on the hardness of the wood and the sharpness of the blades. When cutting hardwoods such as oak, black locust, or aspen, the diameter is smaller. For long-term cutting of hardwoods, we recommend sharpening or replacing the blades regularly. Furthermore, the wood should always be fresh and moist inside before cutting, as it is softer than dry wood and easier to cut.
Comment