Length: 6/9/12/15/18M The fine shape of a voltax nozzle in the guide vane and a fine hollow mist is sprayed from the orifice. Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt fog testing and other artificial fogging. These nozzles are drilled with an American precision drill, the hole diameter is up to 1000 mm. 0.4 mm, well made, comparing costs and gases with humidification, saving 10 or more. Simple, the mist sprays well, the atomization is sufficient, energy and water savings are low and the effect is strong. The stainless steel spray film is treated with an advanced forging process and has a long service life. It is 2.5 times longer than the same type of nozzle. It fully utilizes tap water pressure for atomization. The use of a high-pressure water pump is recommended. Installation Guide: 1. It is recommended to install the atomization system at a height of 2.5 m to 3 m. 2. Connect the adapter to the tap. 3. Turn on the tap cleaning system for 1 minute to clean the system and remove impurities. 4. Screw the drain nozzle onto the tee, except for the end nozzle. 5. Turn on the tap cleaning system for 2 minutes to ensure the system is completely clean. 6. Turn off the water and install the last nozzle onto the fitting and use the end cap. 7. The atomization tube is secured with the included cable tie saddle clip. 8. Open the tap until the sprayer is working and the cooling atomization system is activated. Cap: 1 PE hose: 9 m³/10.2 cm adapter: 1 tap adapter: 1 hose clip: 30 hose clamps: 30 12 MK.
Your Cart
All orders are processed in
USD.
While the content of your cart is currently displayed in
CYN,
you will checkout using
USD
at the most current exchange rate.
Out of stock
Some items are no longer available. Your cart has been updated.
Have a discount code?
Tip
Shipping Insurance
Subtotal
Discount
This discount code cannot be used in conjunction with other promotional or discounted offer.
Total
Taxes and shipping calculated at checkout
Comment